YHMicros release the first Dual SP3T USB Type C Switch YHM1003, which has high voltage, high BW and low audio THD, can be used in smart phone、tablet and AR/VR.

• Support 1:3 switches
• USB2.0 High Speed(480Mbps) Switch

•-3dB bandwidth: 920MHz

•USB path Ron: 3 Ω (Typ.)

• Audio switch

•Negative rail capability: -3.5V to +3.5V

•Audio path RON = 0.42 Ω (Typ.) at 3.3 V

•THD+N = -114 dB; 1 VRMS, 32Ω Load; f =20Hz~20kHz with A-weighted filter

• AGND switch with 50 mΩ(typ.) Ron
• Moisture or Impedance detection support over DPR/DNL/CCx/SBUx

• OVLO threshold programmable

             •3.3V,4.0V,4.5V or 4.9V for USB/Audio/GSBU/SBU Path

• IOFF Supports Power down Mode
• Max Quiescent current Iccz=20uA(typ.) with watch-dog function active
• Max Supply current Icc=50uA with full functions
• +/-21V DC protection on Type-C connector side pins: CC/DPR/DNL/SBUx/GSBUx
• One configurable watch dog output pin can reset other device, or turn off direct charge power path
• DP2/DN2 back up for UART through SBU2 pin
• l5x5 array, 25 bump, 0.4mm pitch, 2.18mm x 2.18mm WLP